Advanced Materials Letters

Author Index

A

A. Aljohani, Talal Modification of mesoporous titanium dioxide with cobalt oxide electrocatalyst for enhanced oxygen evolution reaction [Volume 10, Issue 2, 2019, Pages 136-144]
A. Alvarez, Vera In-soil Biodegradation Behavior of Chitosan-Coated Phosphorylated Starch Films [Volume 10, Issue 12, 2019, Pages 907-912]
A. Alvarez, Vera Effect of storage time, plasticizer formulation and extrusion parameters on the performance of thermoplastic starch films [Volume 10, Issue 3, 2019, Pages 206-214]
A. Alvarez, Vera Optimization of acid hydrolysis process for the preparation cellulose nanofibrils [Volume 10, Issue 7, 2019, Pages 499-507]
A. Azzam, Rasha Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration [Volume 10, Issue 8, 2019, Pages 595-603]
Abay, Tirngo Growth, Linear and Nonlinear Optical Studies of D-Tartaric Acid Crystal [Volume 10, Issue 9, 2019, Pages 651-655]
Abdullah, Saad Hybrid EEG-EMG based brain computer interface (BCI) system for real-time robotic arm control [Volume 10, Issue 1, 2019, Pages 35-40]
Abdullah R Alharbi, Safia Anisotropic and Nonlinear Mechanical Properties in Two-dimensional Nanomaterials [Volume 10, Issue 12, 2019, Pages 880-886]
Abu Jafor, Md. Investigating the Machinability of Metallic Matrix Composites Reinforced by Carbon Nanotubes: A Review [Volume 10, Issue 11, 2019, Pages 786-792]
A. Carreño Díaz, Luz Ionic liquid [BMIM][Cl] immobilized on cellulose fibers from pineapple leaves for desulphurization of fuels [Volume 10, Issue 5, 2019, Pages 334-340]
A. Elsayed, Mohamed Ag₂CO₃ / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye [Volume 10, Issue 7, 2019, Pages 491-498]
A. Elsayed, Mohamed Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process [Volume 10, Issue 8, 2019, Pages 574-585]
Afflerbach, Sandra A fundamental study on the mechanistic impact of repeated de- and rehydration of Ca(OH)₂ on thermochemical cycling in technical scale [Volume 10, Issue 5, 2019, Pages 312-318]
A. F. Zikry, Amina Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration [Volume 10, Issue 8, 2019, Pages 595-603]
Agarwal, Kavita Synthesis of AgNPs embedded double network nanocomposite hydrogels having high swelling and anti-bacterial characteristics [Volume 10, Issue 6, 2019, Pages 431-439]
Aghamiri, Seyedfoad Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO₂ adsorption [Volume 10, Issue 8, 2019, Pages 604-609]
A. Ghanem, Mohamed Modification of mesoporous titanium dioxide with cobalt oxide electrocatalyst for enhanced oxygen evolution reaction [Volume 10, Issue 2, 2019, Pages 136-144]
Ahammed, Nashiruddin Influence of Iron Doping on Structural and Optical Properties of Nickel Oxide Nanoparticles [Volume 10, Issue 10, 2019, Pages 746-751]
A.I. Kestens, Leo Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel [Volume 10, Issue 7, 2019, Pages 515-518]
Akanda, Md. Masum Locally available Clays of Bangladesh as a Replacement of imported Clays for Ceramic Industries [Volume 10, Issue 11, 2019, Pages 839-843]
Akbar Malik, Muhammad Development of anti-bio deteriorate sustainable geopolymer by SiO₂ NPs decorated ZnO NRs [Volume 10, Issue 2, 2019, Pages 128-131]
Akbar Malik, Muhammad Metal oxide (V₂O₅) incorporated fly ash based geopolymer for better sustainable engineering composites [Volume 10, Issue 5, 2019, Pages 346-350]
A. Khan, Muhammad Hybrid EEG-EMG based brain computer interface (BCI) system for real-time robotic arm control [Volume 10, Issue 1, 2019, Pages 35-40]
Alajmi, F.M. Study the possibility of using sisal fibres in building applications [Volume 10, Issue 3, 2019, Pages 222-229]
Alajmi, R. Study the possibility of using sisal fibres in building applications [Volume 10, Issue 3, 2019, Pages 222-229]
Al-Ali, Maha Morphological, structural, thermal and degradation properties of polylactic acid-waxy maize starch nanocrystals based nanocomposites prepared by melt processing [Volume 10, Issue 3, 2019, Pages 170-177]
A. Leites, Larissa Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp² carbon modifications in industry and in nature [Volume 10, Issue 8, 2019, Pages 550-562]
Alemu, Betelhem Growth, Linear and Nonlinear Optical Studies of D-Tartaric Acid Crystal [Volume 10, Issue 9, 2019, Pages 651-655]
Alena Girelli, Valentina Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element [Volume 10, Issue 10, 2019, Pages 695-699]
Ali, Nada Critical Association Concentration of Dansyl-Poly (acrylic acid) Synthetized by Redox Polymerization Followed by an Esterification in Aqueous Solution: Spectrophotometric and Tensiometric Studies [Volume 10, Issue 10, 2019, Pages 741-745]
Aliotta, Laura Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
Al-Mattarneh, Hashem Physical and mechanical properties of microwave absorber material containing micro and nano barium ferrite [Volume 10, Issue 4, 2019, Pages 259-262]
Al-Mattarneh, Hashem Determination of leachate pollution content in soil using in-situ dielectric measurement [Volume 10, Issue 4, 2019, Pages 298-301]
Alvarez, Diego Device and method for the biomechanical analysis of articular amplitude using micro-sensors for the measurement of movement [Volume 10, Issue 1, 2019, Pages 41-44]
A. Malinovskaya, Svetlana Generation of entanglement in spin states of Rydberg atoms by chirped optical pulses [Volume 10, Issue 9, 2019, Pages 619-621]
Ambriz-Vargas, Fabian Oxygen vacancy filament-based resistive switching in Hf_0.5Zr_0.5O₂ thin films for non-volatile memory [Volume 10, Issue 6, 2019, Pages 405-409]
A. Mohamed, Farghalli Effect of diamantane on the thermal stability of cryomilled aluminum alloy [Volume 10, Issue 5, 2019, Pages 361-365]
A. Nada, Amr Ag₂CO₃ / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye [Volume 10, Issue 7, 2019, Pages 491-498]
Anand, M.S. Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Aniq Barid Basri, Muhammad Digital Light Processing (DLP) 3D Printing of Polyethylene Glycol (PEG) Biopolymer, Commercially available Ultra-High and Tough (UHT) Resin and Maghemite (γ-Fe₂O₃) Nanoparticles Mixture for Tissue Engineering Scaffold Application [Volume 10, Issue 11, 2019, Pages 802-806]
Anjum, Sadiya Water Management within Tragacanth gum-g-polyitaconic Acid Hydrogels [Volume 10, Issue 10, 2019, Pages 711-714]
Anjum, Sadiya Influence of surfactant on the patterning behavior of nanosilver within polyacrylamide nanogels [Volume 10, Issue 3, 2019, Pages 178-179]
Anjum, Sadiya Preparation of novel tragacanth gum-entrapped lecithin nanogels [Volume 10, Issue 4, 2019, Pages 267-269]
Ansari, Azizurrahaman Dielectric Properties of Cu based Polymeric Composites in X-band of Microwave Frequency [Volume 10, Issue 10, 2019, Pages 737-740]
A. Omotoyinbo, Joseph Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials – A Review [Volume 10, Issue 10, 2019, Pages 682-694]
Arafat Mahmud, Md Low temperature processed efficient and stable perovskite solar cell [Volume 10, Issue 2, 2019, Pages 98-106]
Ardu, Andrea (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Arfin, Tanvir Review on Detection of Phenol in Water [Volume 10, Issue 11, 2019, Pages 753-785]
Arl, Didier PRAP-CVD: Up-scalable process for the deposition of PEDOT thin films [Volume 10, Issue 3, 2019, Pages 201-205]
Arthoba Nayaka, Yanjerappa Triclinic LiVPO₄F/C cathode for aqueous rechargeable lithium-ion batteries [Volume 10, Issue 3, 2019, Pages 193-200]
Arunachalam, Prabhakarn Modification of mesoporous titanium dioxide with cobalt oxide electrocatalyst for enhanced oxygen evolution reaction [Volume 10, Issue 2, 2019, Pages 136-144]
Ashuri, Maziar Coating - A potent method to enhance electrochemical performance of Li(NixMnyCoz)O₂ cathodes for Li-ion batteries [Volume 10, Issue 6, 2019, Pages 369-380]
A. Yashtulov, Nicolay Development of Advanced Electrode Materials on Porous Silicon for Micropower Formic Acid-Oxygen Fuel Cells [Volume 10, Issue 10, 2019, Pages 705-710]
Azhagiri, A. Synthesis and role of co-dopants (alkaline earth divalents and halides) on the photoluminescence of Eu²⁺ doped BaAl₂O₄ phosphor [Volume 10, Issue 5, 2019, Pages 341-345]

B

Baayu, Naziha Critical Association Concentration of Dansyl-Poly (acrylic acid) Synthetized by Redox Polymerization Followed by an Esterification in Aqueous Solution: Spectrophotometric and Tensiometric Studies [Volume 10, Issue 10, 2019, Pages 741-745]
Baglioni, Piero Bottom-up design of hydrogels through click-chemistry modification of magnetic nanoparticles [Volume 10, Issue 6, 2019, Pages 386-390]
Baishakhi Upama, Mushfika Low temperature processed efficient and stable perovskite solar cell [Volume 10, Issue 2, 2019, Pages 98-106]
Basavalingaiah, K.R. Synthesis of Cu₂O/Ag Composite Nanocubes with Promising Photoluminescence and Photodegradation Activity over Methylene Blue Dye [Volume 10, Issue 11, 2019, Pages 832-838]
B. Chouke, Prashant Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
Bekele, Eshetu Synthesis and Characterization of Humic Acid-coated Fe₃O₄ Nanoparticles for Methylene Blue Adsorption Activity [Volume 10, Issue 10, 2019, Pages 715-723]
Bellisario, Denise Shape Memory Polymer Composites for Long-Term Exposure to Space Environment [Volume 10, Issue 12, 2019, Pages 903-906]
Bhorolua, Dipjyoti Onion juice assisted green reduction of graphene oxide with tunable structural and optical properties: Effect of onion juice concentration and reaction temperature [Volume 10, Issue 1, 2019, Pages 58-66]
Bideau, Benoit Substrate integrated circular cavity resonator filled with nano-fibrillated cellulose for humidity detection [Volume 10, Issue 6, 2019, Pages 400-404]
Binalfeus, Eleni Growth, Linear and Nonlinear Optical Studies of D-Tartaric Acid Crystal [Volume 10, Issue 9, 2019, Pages 651-655]
Bin Karim, Asif Locally available Clays of Bangladesh as a Replacement of imported Clays for Ceramic Industries [Volume 10, Issue 11, 2019, Pages 839-843]
Biplob Hossain, Md. Graphene-MoS₂-Au-TiO₂-SiO₂ Hybrid SPR Biosensor for Formalin Detection: Numerical Analysis and Development [Volume 10, Issue 9, 2019, Pages 656-662]
B. Kondawar, Subhash Polypyrrole/MWCNT nanobiocomposite based electrochemical urease biosensor [Volume 10, Issue 2, 2019, Pages 116-123]
Bobyr, Mykola Influence of railway-track grinding on the track material condition and tribological behaviour [Volume 10, Issue 7, 2019, Pages 449-454]
Bonini, Massimo Bottom-up design of hydrogels through click-chemistry modification of magnetic nanoparticles [Volume 10, Issue 6, 2019, Pages 386-390]
Born, Larissa Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
Borodiy, Yuriy Influence of railway-track grinding on the track material condition and tribological behaviour [Volume 10, Issue 7, 2019, Pages 449-454]
Buchkov, Krastyo The Vortex Glass-Liquid Transition in Fe_1.02Se Crystal [Volume 10, Issue 9, 2019, Pages 627-632]
Buckova, Katrin Analysis of machined electron beam treated Ti6Al4V-ELI implant surfaces [Volume 10, Issue 6, 2019, Pages 381-385]

C

Cabras, Valentina (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Callejas-Cuervo, Mauro Device and method for the biomechanical analysis of articular amplitude using micro-sensors for the measurement of movement [Volume 10, Issue 1, 2019, Pages 41-44]
C. Alvarez, Juan Device and method for the biomechanical analysis of articular amplitude using micro-sensors for the measurement of movement [Volume 10, Issue 1, 2019, Pages 41-44]
C Ananda Murthy, H Synthesis and Characterization of Humic Acid-coated Fe₃O₄ Nanoparticles for Methylene Blue Adsorption Activity [Volume 10, Issue 10, 2019, Pages 715-723]
C. Ananda Murthy, H. Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system [Volume 10, Issue 8, 2019, Pages 524-532]
Carolina Cano-Franco, Julieth Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers [Volume 10, Issue 8, 2019, Pages 539-544]
C. Ekennia, Anthony Silver nanoparticles mediated by extract of Guar plant (Cyamopsis tetragonoloba)), and evaluation of their photocatalytic and antibacterial properties [Volume 10, Issue 4, 2019, Pages 284-293]
Celasco, E. Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices [Volume 10, Issue 7, 2019, Pages 460-464]
Celasco, E. Chemical Reactivity and Electronical Properties of Graphene and Reduced Graphene Oxide on Different Substrates [Volume 10, Issue 8, 2019, Pages 545-549]
Ceolín, Marcelo Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers [Volume 10, Issue 7, 2019, Pages 476-483]
Chaitanya Sagar, T Electronic scale properties of pristine stanene and tin forms using ab-initio methods [Volume 10, Issue 1, 2019, Pages 74-78]
Chanakya, H.N. Plasma Activated Water as a Source of Nitrogen for Algae Growth [Volume 10, Issue 11, 2019, Pages 797-801]
Chandrasekhar, N. Green Synthesis and Characterization of Silver Nanoparticles using Cassia auriculata Leaves Extract and Its Efficacy as A Potential Antibacterial and Cytotoxic Effect [Volume 10, Issue 11, 2019, Pages 844-849]
Chand Shami, Trilok Synthesis and characterization of thermally stable flame retardant thermoplastic polyphosphazenes [Volume 10, Issue 10, 2019, Pages 724-730]
Chaudhari, Rahul Synthesis of Rod-coil Molecules bearing Oligo-Phenylene Vinylene Motifs: Effect of PEO Chain Lengths on the Evolution of Nanostructures Morphology and their Photophysical Properties [Volume 10, Issue 10, 2019, Pages 731-736]
Chen, Pengwan Molecular origin of hardening effect [Volume 10, Issue 2, 2019, Pages 112-115]
Cicala, Gianluca Photocatalytic ZnO based PES Membranes for AOP Water Treatments under UV and Sunlight [Volume 10, Issue 11, 2019, Pages 793-796]
Cinelli, Patrizia Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
Ciofani, Gianni Piezo-therapy in cancer: Current research and perspectives [Volume 10, Issue 5, 2019, Pages 303-304]
Coltelli, Maria-Beatrice Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
Columbu, Stefano (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Connolley, T. Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens [Volume 10, Issue 7, 2019, Pages 455-459]
C. Onwudiwe, Damian Silver nanoparticles mediated by extract of Guar plant (Cyamopsis tetragonoloba)), and evaluation of their photocatalytic and antibacterial properties [Volume 10, Issue 4, 2019, Pages 284-293]
Cordeiro-da-Silva, Anabela Evaluation of NSAIDs antioxidant activity on lipid peroxidation in splenocyte membranes [Volume 10, Issue 3, 2019, Pages 164-169]
Corte-León, Paula Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]

D

Dahim, Mohamed Physical and mechanical properties of microwave absorber material containing micro and nano barium ferrite [Volume 10, Issue 4, 2019, Pages 259-262]
Dahim, Mohammed Determination of leachate pollution content in soil using in-situ dielectric measurement [Volume 10, Issue 4, 2019, Pages 298-301]
Danti, Serena Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
Dasappa, S. Plasma Activated Water Generation and its Application in Agriculture [Volume 10, Issue 10, 2019, Pages 700-704]
Dasappa, S. Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Davazoglou, Dimitris Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
Dayanand Reddy, Gaddam TiO₂ nanoparticles induced oxidative stress mediated DNA damage in the liver of adult male Wistar rats [Volume 10, Issue 2, 2019, Pages 145-150]
Decker, Ricardo Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]
Deslandes, Dominic Substrate integrated circular cavity resonator filled with nano-fibrillated cellulose for humidity detection [Volume 10, Issue 6, 2019, Pages 400-404]
Díaz, Gisela Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers [Volume 10, Issue 7, 2019, Pages 476-483]
Ding, Hong Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Ding, Ya Preparation, stabilization, and self-assembly of gold nanoparticles by Chitosan derivatives [Volume 10, Issue 2, 2019, Pages 80-84]
Dixit, Akansha Synthesis of AgNPs embedded double network nanocomposite hydrogels having high swelling and anti-bacterial characteristics [Volume 10, Issue 6, 2019, Pages 431-439]
Dobrovsky, Ladislav Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
Domingue, Frédéric Substrate integrated circular cavity resonator filled with nano-fibrillated cellulose for humidity detection [Volume 10, Issue 6, 2019, Pages 400-404]
Dong, Guangneng Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Donnelly, E. Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens [Volume 10, Issue 7, 2019, Pages 455-459]
Dosoudilova, Monika Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
Drochytka, Rostislav Possibilities of filling polymeric anchors with secondary raw materials with effect on price and final parameters [Volume 10, Issue 1, 2019, Pages 29-34]
Drozd, Zdeněk Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]
D. Sintayehu, Yilkal Polypyrrole based biofunctional composite layer for bioelectrocatalytic device system [Volume 10, Issue 8, 2019, Pages 524-532]
Džugan, Ján Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]

E

Eberlein, Robert Validation of Advanced Constitutive Models for Accurate FE Modeling of TPU [Volume 10, Issue 12, 2019, Pages 893-898]
E. Bracone, Melina Optimization of acid hydrolysis process for the preparation cellulose nanofibrils [Volume 10, Issue 7, 2019, Pages 499-507]
E. Elemike, Elias Silver nanoparticles mediated by extract of Guar plant (Cyamopsis tetragonoloba)), and evaluation of their photocatalytic and antibacterial properties [Volume 10, Issue 4, 2019, Pages 284-293]
E. Elmowafy, Mohamed Ag₂CO₃ / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye [Volume 10, Issue 7, 2019, Pages 491-498]
Eisenlauer, Moritz Influence factors on the comminution process of wood for the production of precursors and basic chemicals for the chemical industry [Volume 10, Issue 1, 2019, Pages 21-28]
Elena Fragalà, Maria Photocatalytic ZnO based PES Membranes for AOP Water Treatments under UV and Sunlight [Volume 10, Issue 11, 2019, Pages 793-796]
Eltaboni, Fateh Critical Association Concentration of Dansyl-Poly (acrylic acid) Synthetized by Redox Polymerization Followed by an Esterification in Aqueous Solution: Spectrophotometric and Tensiometric Studies [Volume 10, Issue 10, 2019, Pages 741-745]
E. Njoku, Chioma Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials – A Review [Volume 10, Issue 10, 2019, Pages 682-694]
Ennas, Guido (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Esthaku Peter, M. Growth, Linear and Nonlinear Optical Studies of D-Tartaric Acid Crystal [Volume 10, Issue 9, 2019, Pages 651-655]
Eswara Prasad, N. Synthesis of AgNPs embedded double network nanocomposite hydrogels having high swelling and anti-bacterial characteristics [Volume 10, Issue 6, 2019, Pages 431-439]
E Zelenaya, Anna T-x-y-z phase diagrams assembling: Na₂MoO₄-Na₂CrO₄-Na₂WO₄-Na₂SO₄, Fe-Ni-Co-Cu, Pb-Cd-Bi-Sn, Fe-Ni-Co-FeS-NiS-CoS [Volume 10, Issue 1, 2019, Pages 53-57]

F

Fagla Jules, Mawignon Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Faisal Abdulrazak, Lway Graphene-MoS₂-Au-TiO₂-SiO₂ Hybrid SPR Biosensor for Formalin Detection: Numerical Analysis and Development [Volume 10, Issue 9, 2019, Pages 656-662]
Fallahiarezoudar, Ehsan Digital Light Processing (DLP) 3D Printing of Polyethylene Glycol (PEG) Biopolymer, Commercially available Ultra-High and Tough (UHT) Resin and Maghemite (γ-Fe₂O₃) Nanoparticles Mixture for Tissue Engineering Scaffold Application [Volume 10, Issue 11, 2019, Pages 802-806]
Federico Desimone, Martín Riboflavin-UVA gelatin crosslinking: Design of a biocompatible and thermo-responsive biomaterial with enhanced mechanical properties for tissue engineering [Volume 10, Issue 5, 2019, Pages 324-328]
Felipe Zapata-González, Andrés Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers [Volume 10, Issue 8, 2019, Pages 539-544]
Feng, Xinan Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Feng, Yagang Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Fernández Rojas, Marisol Ionic liquid [BMIM][Cl] immobilized on cellulose fibers from pineapple leaves for desulphurization of fuels [Volume 10, Issue 5, 2019, Pages 334-340]
Ferreira, Helena Evaluation of NSAIDs antioxidant activity on lipid peroxidation in splenocyte membranes [Volume 10, Issue 3, 2019, Pages 164-169]
F. Hincapié Rojas, Daniel Production and characterization of silica nanoparticles from rice husk [Volume 10, Issue 1, 2019, Pages 67-73]
Fiorellino, Francesca (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Fuchs, Gunter The Vortex Glass-Liquid Transition in Fe_1.02Se Crystal [Volume 10, Issue 9, 2019, Pages 627-632]
Fujii, Misako Impact of carbon black aggregates on the optical properties of black rubber samples in the terahertz frequency range [Volume 10, Issue 1, 2019, Pages 49-52]
Fukushima, Hiro Graphene micromesh for transparent conductive films application [Volume 10, Issue 6, 2019, Pages 417-420]

G

Galluzzi, Armando The Vortex Glass-Liquid Transition in Fe_1.02Se Crystal [Volume 10, Issue 9, 2019, Pages 627-632]
Ganapathi, Mahalaxmi Morphological, structural, thermal and degradation properties of polylactic acid-waxy maize starch nanocrystals based nanocomposites prepared by melt processing [Volume 10, Issue 3, 2019, Pages 170-177]
Ganesh Subramanian, P.S Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Gao, Wei Applications of nano-scale Cirrus Dopant^TM to improve existing coatings [Volume 10, Issue 6, 2019, Pages 421-424]
Gasparini, Giada Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element [Volume 10, Issue 10, 2019, Pages 695-699]
Geetanjali, Fabrication of Nanoparticle Embedded Polymeric Microbeads as an Efficient Drug Delivery System [Volume 10, Issue 11, 2019, Pages 807-813]
George, Jinu Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin [Volume 10, Issue 7, 2019, Pages 508-514]
Getachew, Seblewongel Growth, Linear and Nonlinear Optical Studies of D-Tartaric Acid Crystal [Volume 10, Issue 9, 2019, Pages 651-655]
Giannakopoulos, Kostas Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
Gigante, Vito Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
G. Majumdar, Ananda Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance [Volume 10, Issue 11, 2019, Pages 825-831]
G Moodley, Kandasamy Advances in corrosion inhibition materials and technologies: A review [Volume 10, Issue 4, 2019, Pages 231-247]
Gobara, Mohamed Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process [Volume 10, Issue 8, 2019, Pages 574-585]
Godin, Amanda Water vapor adsorption in silica gel for thermal energy storage application [Volume 10, Issue 2, 2019, Pages 124-127]
Gomaji Chaudhary, Ratiram Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
González-Legarreta, Lorena Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]
Gonzalez, Julian Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]
Goode, Chris Applications of nano-scale Cirrus Dopant^TM to improve existing coatings [Volume 10, Issue 6, 2019, Pages 421-424]
Griffin, Gregory Morphological, structural, thermal and degradation properties of polylactic acid-waxy maize starch nanocrystals based nanocomposites prepared by melt processing [Volume 10, Issue 3, 2019, Pages 170-177]
G. Shivappa, Suresh Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries [Volume 10, Issue 8, 2019, Pages 586-594]
Gupta, Bhuvanesh Water Management within Tragacanth gum-g-polyitaconic Acid Hydrogels [Volume 10, Issue 10, 2019, Pages 711-714]
Gupta, Bhuvanesh Influence of surfactant on the patterning behavior of nanosilver within polyacrylamide nanogels [Volume 10, Issue 3, 2019, Pages 178-179]
Gupta, Bhuvanesh Preparation of novel tragacanth gum-entrapped lecithin nanogels [Volume 10, Issue 4, 2019, Pages 267-269]
Gurukar Shivappa, Suresh Triclinic LiVPO₄F/C cathode for aqueous rechargeable lithium-ion batteries [Volume 10, Issue 3, 2019, Pages 193-200]

H

Hafezi, Mahshid Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
H. Aish, E. Stress Fields at the Central Point of Arc Crack under Uniaxial Tension [Volume 10, Issue 9, 2019, Pages 671-674]
Halmešová, Kristýna Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]
Han, Rifei Fabrication of Y₂O₃ coatings by cold-spray [Volume 10, Issue 3, 2019, Pages 189-192]
Handan Tezel, F. Water vapor adsorption in silica gel for thermal energy storage application [Volume 10, Issue 2, 2019, Pages 124-127]
Haque, Faiazul Low temperature processed efficient and stable perovskite solar cell [Volume 10, Issue 2, 2019, Pages 98-106]
Harishkumar, S. Synthesis of Cu₂O/Ag Composite Nanocubes with Promising Photoluminescence and Photodegradation Activity over Methylene Blue Dye [Volume 10, Issue 11, 2019, Pages 832-838]
Harsha, R. Plasma Activated Water Generation and its Application in Agriculture [Volume 10, Issue 10, 2019, Pages 700-704]
Harsha, R. Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Hartwig, Melinda Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]
Hasan Ali, Md. Investigating the Machinability of Metallic Matrix Composites Reinforced by Carbon Nanotubes: A Review [Volume 10, Issue 11, 2019, Pages 786-792]
Hasrul Akhmal Ngadiman, Nor Digital Light Processing (DLP) 3D Printing of Polyethylene Glycol (PEG) Biopolymer, Commercially available Ultra-High and Tough (UHT) Resin and Maghemite (γ-Fe₂O₃) Nanoparticles Mixture for Tissue Engineering Scaffold Application [Volume 10, Issue 11, 2019, Pages 802-806]
Hassan, Mehedi Graphene-MoS₂-Au-TiO₂-SiO₂ Hybrid SPR Biosensor for Formalin Detection: Numerical Analysis and Development [Volume 10, Issue 9, 2019, Pages 656-662]
Hatamleh, Randa Determination of leachate pollution content in soil using in-situ dielectric measurement [Volume 10, Issue 4, 2019, Pages 298-301]
He, Jia Preparation, stabilization, and self-assembly of gold nanoparticles by Chitosan derivatives [Volume 10, Issue 2, 2019, Pages 80-84]
He, Yuan Review of nanoscale layered transition metal chalcogenide superconductors [Volume 10, Issue 3, 2019, Pages 152-163]
Hemanth, M. Plasma Activated Water Generation and its Application in Agriculture [Volume 10, Issue 10, 2019, Pages 700-704]
Hemanth, M. Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Heritiana Rasolomboahanginjatovo, Aina Substrate integrated circular cavity resonator filled with nano-fibrillated cellulose for humidity detection [Volume 10, Issue 6, 2019, Pages 400-404]
H. Ibrahim, Ahmed Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration [Volume 10, Issue 8, 2019, Pages 595-603]
H. Meshram, Bhavna Polypyrrole/MWCNT nanobiocomposite based electrochemical urease biosensor [Volume 10, Issue 2, 2019, Pages 116-123]
Hodul, Jakub Possibilities of filling polymeric anchors with secondary raw materials with effect on price and final parameters [Volume 10, Issue 1, 2019, Pages 29-34]
Hossein Kokabi, Amir Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel [Volume 10, Issue 7, 2019, Pages 515-518]
Hou, Yu Removal of dyes from wastewater by nanomaterials : A review [Volume 10, Issue 1, 2019, Pages 9-20]
Hsieh, Ya-Ping Increasing the efficiency of graphene-based Schottky-barrier devices [Volume 10, Issue 2, 2019, Pages 132-135]
Hu, Jiwei Removal of dyes from wastewater by nanomaterials : A review [Volume 10, Issue 1, 2019, Pages 9-20]
Hua, Ye Water vapor adsorption in silica gel for thermal energy storage application [Volume 10, Issue 2, 2019, Pages 124-127]
Huber, Bernhard Oxygen vacancy filament-based resistive switching in Hf_0.5Zr_0.5O₂ thin films for non-volatile memory [Volume 10, Issue 6, 2019, Pages 405-409]
Hurka, Marta Significant Quality Parameters of Finishing Technology in Offset Printing on Solid Board Boxes Depending on the type of Material [Volume 10, Issue 9, 2019, Pages 614-618]

J

Javier Perez, Claudio Riboflavin-UVA gelatin crosslinking: Design of a biocompatible and thermo-responsive biomaterial with enhanced mechanical properties for tissue engineering [Volume 10, Issue 5, 2019, Pages 324-328]
Jaya Nesamony, Victor Study of TiO₂ nanofibers prepared by electrospinning technique [Volume 10, Issue 4, 2019, Pages 294-297]
J. Bhongale, Chetan Synthesis of Rod-coil Molecules bearing Oligo-Phenylene Vinylene Motifs: Effect of PEO Chain Lengths on the Evolution of Nanostructures Morphology and their Photophysical Properties [Volume 10, Issue 10, 2019, Pages 731-736]
Jerz, Jaroslav Highly efficient storage of solar gains using aluminum foam heat exchangers [Volume 10, Issue 5, 2019, Pages 351-354]
Jiang, Hongxiang Formation of nano-dispersed Cu particles during aging of a Fe-Cu alloy and dislocation effect [Volume 10, Issue 4, 2019, Pages 263-266]
John, Franklin Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin [Volume 10, Issue 7, 2019, Pages 508-514]
John, Patrick Dry cutting with high-pressure liquid CO₂ jets [Volume 10, Issue 1, 2019, Pages 2-8]
Jose, M.T. Synthesis and role of co-dopants (alkaline earth divalents and halides) on the photoluminescence of Eu²⁺ doped BaAl₂O₄ phosphor [Volume 10, Issue 5, 2019, Pages 341-345]
Joy, Reshma Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin [Volume 10, Issue 7, 2019, Pages 508-514]
J. Sidor, Jurij Deformation Texture Modelling by Mean-Field and Full-Field Approaches [Volume 10, Issue 9, 2019, Pages 643-650]

K

K.A., Vishnumurthy Effect of silver nanoparticles on the ammonia gas sensing behavior in diphenylamine based conjugated polymer [Volume 10, Issue 3, 2019, Pages 215-221]
Kakkar, Rita Graphene and doped graphene: A comparative DFT study [Volume 10, Issue 7, 2019, Pages 484-490]
K. Alaneme, Kenneth Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials – A Review [Volume 10, Issue 10, 2019, Pages 682-694]
Kandasamy, Ganeshlenin SPIONs and curcumin co-encapsulated mixed micelles based nanoformulation for biomedical applications [Volume 10, Issue 3, 2019, Pages 185-188]
Kao, Nhol Morphological, structural, thermal and degradation properties of polylactic acid-waxy maize starch nanocrystals based nanocomposites prepared by melt processing [Volume 10, Issue 3, 2019, Pages 170-177]
Kawazoe, T. Principles and practices of Si light emitting diodes using dressed photons [Volume 10, Issue 12, 2019, Pages 860-867]
Kedia, Sunita Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance [Volume 10, Issue 11, 2019, Pages 825-831]
Kennou, Stella Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
Kheirandish, Shahram Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel [Volume 10, Issue 7, 2019, Pages 515-518]
Khuzkhaz, Mansour Critical Association Concentration of Dansyl-Poly (acrylic acid) Synthetized by Redox Polymerization Followed by an Esterification in Aqueous Solution: Spectrophotometric and Tensiometric Studies [Volume 10, Issue 10, 2019, Pages 741-745]
Kin Wong, Pak Tuning Polydimethylsiloxane (PDMS) properties for biomedical applications [Volume 10, Issue 2, 2019, Pages 107-111]
Kittappa Malavalli, Mahadevan Triclinic LiVPO₄F/C cathode for aqueous rechargeable lithium-ion batteries [Volume 10, Issue 3, 2019, Pages 193-200]
Klayya, Supattra Micro/Nanostructured Papers from Bagasse Pulp Reinforced by Nanofibrillated Cellulose from different Agro-Waste Sources [Volume 10, Issue 11, 2019, Pages 814-818]
K. Mikhailenko, Evgeniy Magnetic Properties of Intercalated Gr/Ni (111) System [Volume 10, Issue 9, 2019, Pages 633-636]
K. Mishra, Raghvendra Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
Knippers, Jan Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
K. Ojha, Animesh Onion juice assisted green reduction of graphene oxide with tunable structural and optical properties: Effect of onion juice concentration and reaction temperature [Volume 10, Issue 1, 2019, Pages 58-66]
Kolhatkar, Gitanjali Oxygen vacancy filament-based resistive switching in Hf_0.5Zr_0.5O₂ thin films for non-volatile memory [Volume 10, Issue 6, 2019, Pages 405-409]
Komatsu, Naoki Various surfactants for 0 – 3 dimensional nanocarbons: Separation, exfoliation and solubilization [Volume 10, Issue 8, 2019, Pages 520-523]
Kong, Lingyan Fabrication of Y₂O₃ coatings by cold-spray [Volume 10, Issue 3, 2019, Pages 189-192]
Kosaka, Fumihiko Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells [Volume 10, Issue 8, 2019, Pages 563-568]
Körner, Axel Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
Kövér, Michal Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]
K. Potbhare, Ajay Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
Kracklauer, Mark Oxygen vacancy filament-based resistive switching in Hf_0.5Zr_0.5O₂ thin films for non-volatile memory [Volume 10, Issue 6, 2019, Pages 405-409]
Kroll, Lothar Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]
K. Sahu, A. Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance [Volume 10, Issue 11, 2019, Pages 825-831]
K. Sharma, Dhirendra Synthesis of AgNPs embedded double network nanocomposite hydrogels having high swelling and anti-bacterial characteristics [Volume 10, Issue 6, 2019, Pages 431-439]
Kucerova, Anna Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
Kumar, Ashok Onion juice assisted green reduction of graphene oxide with tunable structural and optical properties: Effect of onion juice concentration and reaction temperature [Volume 10, Issue 1, 2019, Pages 58-66]
Kumar, Nand Synthesis and characterization of thermally stable flame retardant thermoplastic polyphosphazenes [Volume 10, Issue 10, 2019, Pages 724-730]
Kumar, Nand Synthesis of AgNPs embedded double network nanocomposite hydrogels having high swelling and anti-bacterial characteristics [Volume 10, Issue 6, 2019, Pages 431-439]
Kumar, Sumeet Onion juice assisted green reduction of graphene oxide with tunable structural and optical properties: Effect of onion juice concentration and reaction temperature [Volume 10, Issue 1, 2019, Pages 58-66]
Kumar, Umesh Functionalized Nano Carbon for excellent Microwave Absorption at GHz Frequency [Volume 10, Issue 9, 2019, Pages 637-642]
Kumar Elumalai, Naveen Low temperature processed efficient and stable perovskite solar cell [Volume 10, Issue 2, 2019, Pages 98-106]
Kumar Gupta, Sanjeev Modulation of optical properties with multilayer thickness in antimonene and indiene [Volume 10, Issue 4, 2019, Pages 270-274]
Kumar Srivastava, Avanish Functionalized Nano Carbon for excellent Microwave Absorption at GHz Frequency [Volume 10, Issue 9, 2019, Pages 637-642]
Kunfong, Nutchanad Micro/Nanostructured Papers from Bagasse Pulp Reinforced by Nanofibrillated Cellulose from different Agro-Waste Sources [Volume 10, Issue 11, 2019, Pages 814-818]
K. Wyrwicka, Magdalena Significant Quality Parameters of Finishing Technology in Offset Printing on Solid Board Boxes Depending on the type of Material [Volume 10, Issue 9, 2019, Pages 614-618]

L

Laghi, Vittoria Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element [Volume 10, Issue 10, 2019, Pages 695-699]
Lakshminarayana, R. Plasma Activated Water Generation and its Application in Agriculture [Volume 10, Issue 10, 2019, Pages 700-704]
Lakshminarayana, R. Plasma Activated Water as a Source of Nitrogen for Algae Growth [Volume 10, Issue 11, 2019, Pages 797-801]
Lakshminarayana, R. Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Lavorgna, Marino Innovative Graphene-PDMS sensors for aerospace applications [Volume 10, Issue 8, 2019, Pages 533-538]
Lazzeri, Andrea Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
Le Anh Tuan, Bui Novel synthesis of Pd nanosheets used as highly sensitive SERS substrate for trace fluorescent dye detection [Volume 10, Issue 4, 2019, Pages 279-283]
Leliso, Getahun Growth, Linear and Nonlinear Optical Studies of D-Tartaric Acid Crystal [Volume 10, Issue 9, 2019, Pages 651-655]
Leng Tay, See Applications of nano-scale Cirrus Dopant^TM to improve existing coatings [Volume 10, Issue 6, 2019, Pages 421-424]
Lenoble, Damien PRAP-CVD: Up-scalable process for the deposition of PEDOT thin films [Volume 10, Issue 3, 2019, Pages 201-205]
Leturcq, Renauld PRAP-CVD: Up-scalable process for the deposition of PEDOT thin films [Volume 10, Issue 3, 2019, Pages 201-205]
L. F. C. Lima, José Evaluation of NSAIDs antioxidant activity on lipid peroxidation in splenocyte membranes [Volume 10, Issue 3, 2019, Pages 164-169]
Li, Chien-I Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells [Volume 10, Issue 8, 2019, Pages 563-568]
Li, Jiang Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Li, Tiefan Fabrication of Y₂O₃ coatings by cold-spray [Volume 10, Issue 3, 2019, Pages 189-192]
LI, Jiayi Fabrication of Y₂O₃ coatings by cold-spray [Volume 10, Issue 3, 2019, Pages 189-192]
Liu, Bin Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Liu, Emily Anisotropic and Nonlinear Mechanical Properties in Two-dimensional Nanomaterials [Volume 10, Issue 12, 2019, Pages 880-886]
Loranger, Éric Substrate integrated circular cavity resonator filled with nano-fibrillated cellulose for humidity detection [Volume 10, Issue 6, 2019, Pages 400-404]
Lu, Jia Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Lu, Yao Synthesis, Structural Characterization, Dielectric and Piezoelectric Properties of Multiferroic Double-perovskite Bi₂FeMnO₆ Ceramics [Volume 10, Issue 12, 2019, Pages 874-879]
Lucía Álvarez-Láinez, Mónica Effect of hot drawing process and carbonization temperature in electrochemical behavior of electrospun carbon nanofibers [Volume 10, Issue 8, 2019, Pages 539-544]
Lukáč, Pavel Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]
Lukačević, Igor Modulation of optical properties with multilayer thickness in antimonene and indiene [Volume 10, Issue 4, 2019, Pages 270-274]
Luo, Huixia Review of nanoscale layered transition metal chalcogenide superconductors [Volume 10, Issue 3, 2019, Pages 152-163]
Luo, Yamin Matrix and Variant Transformations Simulate Statistical Canonical Ensembles from Fock to Poissonian States of Random Sequences [Volume 10, Issue 9, 2019, Pages 622-626]
Lv, Quanshan Broadband and fast photodetectors based on multilayer p-MoTe₂/n-WS₂ heterojunction with graphene electrodes [Volume 10, Issue 5, 2019, Pages 329-333]
Lypovka, Pavlo Influence of railway-track grinding on the track material condition and tribological behaviour [Volume 10, Issue 7, 2019, Pages 449-454]

M

Ma, Xiaoming Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Mader, Anja Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
Mahmoudiniya, Mahdi Study of microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel [Volume 10, Issue 7, 2019, Pages 515-518]
M. Aish, M. Stress Fields at the Central Point of Arc Crack under Uniaxial Tension [Volume 10, Issue 9, 2019, Pages 671-674]
Maiti, Moumita Development of anti-bio deteriorate sustainable geopolymer by SiO₂ NPs decorated ZnO NRs [Volume 10, Issue 2, 2019, Pages 128-131]
Maiti, Moumita Metal oxide (V₂O₅) incorporated fly ash based geopolymer for better sustainable engineering composites [Volume 10, Issue 5, 2019, Pages 346-350]
Maity, Dipak SPIONs and curcumin co-encapsulated mixed micelles based nanoformulation for biomedical applications [Volume 10, Issue 3, 2019, Pages 185-188]
Mallik, Avijit Locally available Clays of Bangladesh as a Replacement of imported Clays for Ceramic Industries [Volume 10, Issue 11, 2019, Pages 839-843]
M. Al-Mayouf, Abdullah Modification of mesoporous titanium dioxide with cobalt oxide electrocatalyst for enhanced oxygen evolution reaction [Volume 10, Issue 2, 2019, Pages 136-144]
Manju, D.K. Characterization of Plasma Activated Water for Medical Applications [Volume 10, Issue 12, 2019, Pages 919-923]
Manuel Galdopórpora, Juan Riboflavin-UVA gelatin crosslinking: Design of a biocompatible and thermo-responsive biomaterial with enhanced mechanical properties for tissue engineering [Volume 10, Issue 5, 2019, Pages 324-328]
Marada, Tomas Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
María Manero, José Cell study of the biomimetic modifications on a CoCrMo alloy for biomedical applications [Volume 10, Issue 3, 2019, Pages 180-184]
Marino, Attilio Piezo-therapy in cancer: Current research and perspectives [Volume 10, Issue 5, 2019, Pages 303-304]
Martin, Joerg Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]
Masud Rana, Md. Graphene-MoS₂-Au-TiO₂-SiO₂ Hybrid SPR Biosensor for Formalin Detection: Numerical Analysis and Development [Volume 10, Issue 9, 2019, Pages 656-662]
Mathis, Kristián Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]
Matteo Tedde, Giovanni Shape Memory Polymer Composites for Long-Term Exposure to Space Environment [Volume 10, Issue 12, 2019, Pages 903-906]
M. Blanco, Juan Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]
McHugh, P.E. Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens [Volume 10, Issue 7, 2019, Pages 455-459]
M. Dunaevsky, Sergey Magnetic Properties of Intercalated Gr/Ni (111) System [Volume 10, Issue 9, 2019, Pages 633-636]
Meazzini, Ilaria Bottom-up design of hydrogels through click-chemistry modification of magnetic nanoparticles [Volume 10, Issue 6, 2019, Pages 386-390]
Mehedi Hassan, M. Influence of Iron Doping on Structural and Optical Properties of Nickel Oxide Nanoparticles [Volume 10, Issue 10, 2019, Pages 746-751]
Menguelti, Kevin PRAP-CVD: Up-scalable process for the deposition of PEDOT thin films [Volume 10, Issue 3, 2019, Pages 201-205]
Merino, Danila In-soil Biodegradation Behavior of Chitosan-Coated Phosphorylated Starch Films [Volume 10, Issue 12, 2019, Pages 907-912]
Mfoumou, Etienne Tuning Polydimethylsiloxane (PDMS) properties for biomedical applications [Volume 10, Issue 2, 2019, Pages 107-111]
M. Giorgi Perez, Angélica Ionic liquid [BMIM][Cl] immobilized on cellulose fibers from pineapple leaves for desulphurization of fuels [Volume 10, Issue 5, 2019, Pages 334-340]
M Giussi, Juan Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers [Volume 10, Issue 7, 2019, Pages 476-483]
M. Hanna, Walid Effect of diamantane on the thermal stability of cryomilled aluminum alloy [Volume 10, Issue 5, 2019, Pages 361-365]
Milwich, Markus Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
Mintu Ali, Md. Locally available Clays of Bangladesh as a Replacement of imported Clays for Ceramic Industries [Volume 10, Issue 11, 2019, Pages 839-843]
Miritello, Maria Innovative silicon compatible materials for light emitting devices [Volume 10, Issue 6, 2019, Pages 410-416]
Mishra, Anuradha Synthesis and characterization of thermally stable flame retardant thermoplastic polyphosphazenes [Volume 10, Issue 10, 2019, Pages 724-730]
Mitkova, Maria Dual Effect of Light Irradiation for Surface Relief Gratings Formation in Se-rich Ge-Se Thin Films [Volume 10, Issue 12, 2019, Pages 868-873]
M. Madkour, Tarek Facile synthesis of novel tough and highly flexible biodegradable membranes for water microfiltration [Volume 10, Issue 8, 2019, Pages 595-603]
Moebius, Martin Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]
Mohaiminul Islam, Md. Graphene-MoS₂-Au-TiO₂-SiO₂ Hybrid SPR Biosensor for Formalin Detection: Numerical Analysis and Development [Volume 10, Issue 9, 2019, Pages 656-662]
Mohd Yusof, Noordin Digital Light Processing (DLP) 3D Printing of Polyethylene Glycol (PEG) Biopolymer, Commercially available Ultra-High and Tough (UHT) Resin and Maghemite (γ-Fe₂O₃) Nanoparticles Mixture for Tissue Engineering Scaffold Application [Volume 10, Issue 11, 2019, Pages 802-806]
Moon Lee, Kiat Nano-Graphene and Its Derivatives for Fabrication of Flexible Electronic Devices: A Quick Review [Volume 10, Issue 10, 2019, Pages 676-681]
Morganti, Pierfrancesco Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
M. Ravikumar, Madhushree Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries [Volume 10, Issue 8, 2019, Pages 586-594]
Muller, Jan Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
Mužević, Matko Modulation of optical properties with multilayer thickness in antimonene and indiene [Volume 10, Issue 4, 2019, Pages 270-274]
M. Weafer, F. Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens [Volume 10, Issue 7, 2019, Pages 455-459]

N

Nagaraju, G. Synthesis of Cu₂O/Ag Composite Nanocubes with Promising Photoluminescence and Photodegradation Activity over Methylene Blue Dye [Volume 10, Issue 11, 2019, Pages 832-838]
Natarajan, K. Effect of silver nanoparticles on the ammonia gas sensing behavior in diphenylamine based conjugated polymer [Volume 10, Issue 3, 2019, Pages 215-221]
Nazarova, Elena The Vortex Glass-Liquid Transition in Fe_1.02Se Crystal [Volume 10, Issue 9, 2019, Pages 627-632]
Ndoye, Majid Substrate integrated circular cavity resonator filled with nano-fibrillated cellulose for humidity detection [Volume 10, Issue 6, 2019, Pages 400-404]
Negi, Poonam Water Management within Tragacanth gum-g-polyitaconic Acid Hydrogels [Volume 10, Issue 10, 2019, Pages 711-714]
Negi, Poonam Preparation of novel tragacanth gum-entrapped lecithin nanogels [Volume 10, Issue 4, 2019, Pages 267-269]
Nenkov, Konstantin The Vortex Glass-Liquid Transition in Fe_1.02Se Crystal [Volume 10, Issue 9, 2019, Pages 627-632]
Nichol, Tyler Dual Effect of Light Irradiation for Surface Relief Gratings Formation in Se-rich Ge-Se Thin Films [Volume 10, Issue 12, 2019, Pages 868-873]
Nishida, Hiroki Graphene micromesh for transparent conductive films application [Volume 10, Issue 6, 2019, Pages 417-420]
N. Kouvatsos, Dimitris Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
N. Luduena, Leandro Optimization of acid hydrolysis process for the preparation cellulose nanofibrils [Volume 10, Issue 7, 2019, Pages 499-507]
N. Ludueña, Leandro Effect of storage time, plasticizer formulation and extrusion parameters on the performance of thermoplastic starch films [Volume 10, Issue 3, 2019, Pages 206-214]
N. Panin, Gennady Photomemristive heterostructures based on two-dimensional crystals [Volume 10, Issue 7, 2019, Pages 470-475]

O

O. Daramola, Michael Natural Fibers as Viable Sources for the Development of Structural, Semi-Structural, and Technological Materials – A Review [Volume 10, Issue 10, 2019, Pages 682-694]
Ognibene, Giulia Photocatalytic ZnO based PES Membranes for AOP Water Treatments under UV and Sunlight [Volume 10, Issue 11, 2019, Pages 793-796]
Oh, Gilgu Graphene micromesh for transparent conductive films application [Volume 10, Issue 6, 2019, Pages 417-420]
Ohtsu, M. Principles and practices of Si light emitting diodes using dressed photons [Volume 10, Issue 12, 2019, Pages 860-867]
Oikawa, Akio Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells [Volume 10, Issue 8, 2019, Pages 563-568]
Okano, Makoto Impact of carbon black aggregates on the optical properties of black rubber samples in the terahertz frequency range [Volume 10, Issue 1, 2019, Pages 49-52]
O. Kapitanova, Olesya Photomemristive heterostructures based on two-dimensional crystals [Volume 10, Issue 7, 2019, Pages 470-475]
Okura, Toshinori Development of Na+ superionic conducting Na₅YSi₄O₁₂-type glass-ceramics [Volume 10, Issue 2, 2019, Pages 85-90]
Oraby, Hussein Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process [Volume 10, Issue 8, 2019, Pages 574-585]
Osmera junior, Pavel Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
Osmera senior, Pavel Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]
Otomo, Junichiro Electrochemical promotion of ammonia synthesis with proton-conducting solid oxide fuel cells [Volume 10, Issue 8, 2019, Pages 563-568]
Otto, Thomas Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]

P

Pachniak, Elliot Generation of entanglement in spin states of Rydberg atoms by chirped optical pulses [Volume 10, Issue 9, 2019, Pages 619-621]
Palermo, Michele Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element [Volume 10, Issue 10, 2019, Pages 695-699]
Panariello, Luca Chitin nanofibrils in renewable materials for packaging and personal care applications [Volume 10, Issue 6, 2019, Pages 425-430]
Pandit, Yashwant Synthesis of Rod-coil Molecules bearing Oligo-Phenylene Vinylene Motifs: Effect of PEO Chain Lengths on the Evolution of Nanostructures Morphology and their Photophysical Properties [Volume 10, Issue 10, 2019, Pages 731-736]
Papadimitropoulos, Giorgos Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
Paredes, Virginia Cell study of the biomimetic modifications on a CoCrMo alloy for biomedical applications [Volume 10, Issue 3, 2019, Pages 180-184]
Pasieka, Lucian Validation of Advanced Constitutive Models for Accurate FE Modeling of TPU [Volume 10, Issue 12, 2019, Pages 893-898]
Pathania, Deepak Water Management within Tragacanth gum-g-polyitaconic Acid Hydrogels [Volume 10, Issue 10, 2019, Pages 711-714]
Pathania, Deepak Preparation of novel tragacanth gum-entrapped lecithin nanogels [Volume 10, Issue 4, 2019, Pages 267-269]
Patra, Shamayita Influence of surfactant on the patterning behavior of nanosilver within polyacrylamide nanogels [Volume 10, Issue 3, 2019, Pages 178-179]
Patrizi, Barbara Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Paula Guarás, M. Effect of storage time, plasticizer formulation and extrusion parameters on the performance of thermoplastic starch films [Volume 10, Issue 3, 2019, Pages 206-214]
Pei, Zhipeng Synthesis, Structural Characterization, Dielectric and Piezoelectric Properties of Multiferroic Double-perovskite Bi₂FeMnO₆ Ceramics [Volume 10, Issue 12, 2019, Pages 874-879]
Peng, Liping Bi-doped CH₃NH₃PbI₃ effective masses and electronic properties research: A theoretical study using VASP [Volume 10, Issue 4, 2019, Pages 275-278]
Pilloni, Martina (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Pineda Gómez, Posidia Production and characterization of silica nanoparticles from rice husk [Volume 10, Issue 1, 2019, Pages 67-73]
Pin Yeap, Swee Nano-Graphene and Its Derivatives for Fabrication of Flexible Electronic Devices: A Quick Review [Volume 10, Issue 10, 2019, Pages 676-681]
Pirri, Angela Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Piscitelli, Filomena Innovative Graphene-PDMS sensors for aerospace applications [Volume 10, Issue 8, 2019, Pages 533-538]
Piska, Miroslav Analysis of machined electron beam treated Ti6Al4V-ELI implant surfaces [Volume 10, Issue 6, 2019, Pages 381-385]
PM, Sayeesh Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin [Volume 10, Issue 7, 2019, Pages 508-514]
PMD Shaik, Dadamia Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
P. Nenavathu, Bhavani Fabrication of Nanoparticle Embedded Polymeric Microbeads as an Efficient Drug Delivery System [Volume 10, Issue 11, 2019, Pages 807-813]
Polichetti, Massimiliano The Vortex Glass-Liquid Transition in Fe_1.02Se Crystal [Volume 10, Issue 9, 2019, Pages 627-632]
Ponnusamy, V. Synthesis and role of co-dopants (alkaline earth divalents and halides) on the photoluminescence of Eu²⁺ doped BaAl₂O₄ phosphor [Volume 10, Issue 5, 2019, Pages 341-345]
Pradeep, Nibisha Alginate/k-carrageenan and alginate/gelatin composite hydrogel beads for controlled drug release of curcumin [Volume 10, Issue 7, 2019, Pages 508-514]
Pratap Singh, Krishna Synthesis and characterization of thermally stable flame retardant thermoplastic polyphosphazenes [Volume 10, Issue 10, 2019, Pages 724-730]
Priolo, Francesco Innovative silicon compatible materials for light emitting devices [Volume 10, Issue 6, 2019, Pages 410-416]
Protsenko, Pavel Influence of railway-track grinding on the track material condition and tribological behaviour [Volume 10, Issue 7, 2019, Pages 449-454]
Prussak, Robert Chances and challenges in the application of fiber metal laminates [Volume 10, Issue 2, 2019, Pages 91-97]
Punith, N. Plasma Activated Water Generation and its Application in Agriculture [Volume 10, Issue 10, 2019, Pages 700-704]
Punith, N. Plasma Activated Water as a Source of Nitrogen for Algae Growth [Volume 10, Issue 11, 2019, Pages 797-801]
Puttaswamy, Rangaswamy Triclinic LiVPO₄F/C cathode for aqueous rechargeable lithium-ion batteries [Volume 10, Issue 3, 2019, Pages 193-200]
P. Vinay, S. Green Synthesis and Characterization of Silver Nanoparticles using Cassia auriculata Leaves Extract and Its Efficacy as A Potential Antibacterial and Cytotoxic Effect [Volume 10, Issue 11, 2019, Pages 844-849]
P Vorob’eva, Vera T-x-y-z phase diagrams assembling: Na₂MoO₄-Na₂CrO₄-Na₂WO₄-Na₂SO₄, Fe-Ni-Co-Cu, Pb-Cd-Bi-Sn, Fe-Ni-Co-FeS-NiS-CoS [Volume 10, Issue 1, 2019, Pages 53-57]

R

Ramalingam, Venugopal TiO₂ nanoparticles induced oxidative stress mediated DNA damage in the liver of adult male Wistar rats [Volume 10, Issue 2, 2019, Pages 145-150]
Rattanawongkun, Phattharasaya Micro/Nanostructured Papers from Bagasse Pulp Reinforced by Nanofibrillated Cellulose from different Agro-Waste Sources [Volume 10, Issue 11, 2019, Pages 814-818]
R. Aysin, Rinat Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp² carbon modifications in industry and in nature [Volume 10, Issue 8, 2019, Pages 550-562]
R. Baumann, Reinhard Visualization of mechanical loads with semiconductor nanocrystals [Volume 10, Issue 6, 2019, Pages 391-394]
R Chinthapenta, Viswanath Electronic scale properties of pristine stanene and tin forms using ab-initio methods [Volume 10, Issue 1, 2019, Pages 74-78]
Reinfelde, Mara Dual Effect of Light Irradiation for Surface Relief Gratings Formation in Se-rich Ge-Se Thin Films [Volume 10, Issue 12, 2019, Pages 868-873]
Reis, Salette Evaluation of NSAIDs antioxidant activity on lipid peroxidation in splenocyte membranes [Volume 10, Issue 3, 2019, Pages 164-169]
Reitano, Riccardo Innovative silicon compatible materials for light emitting devices [Volume 10, Issue 6, 2019, Pages 410-416]
Reza Talaie, Mohammad Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO₂ adsorption [Volume 10, Issue 8, 2019, Pages 604-609]
Ríos Valer, Gabriel Architecture - behaviour - properties relationship in Star-shaped MPA-PMMA and MPA-PS hyper-branched copolymers [Volume 10, Issue 7, 2019, Pages 476-483]
Ridi, Francesca Bottom-up design of hydrogels through click-chemistry modification of magnetic nanoparticles [Volume 10, Issue 6, 2019, Pages 386-390]
Rita Pistillo, Bianca PRAP-CVD: Up-scalable process for the deposition of PEDOT thin films [Volume 10, Issue 3, 2019, Pages 201-205]
Rizos, Dimosthenis Validation of Advanced Constitutive Models for Accurate FE Modeling of TPU [Volume 10, Issue 12, 2019, Pages 893-898]
Rollo, Gennaro Innovative Graphene-PDMS sensors for aerospace applications [Volume 10, Issue 8, 2019, Pages 533-538]
Rosales Rivera, Andrés Production and characterization of silica nanoparticles from rice husk [Volume 10, Issue 1, 2019, Pages 67-73]
Ross Underhill, P. Selecting the correct electromagnetic inspection technology [Volume 10, Issue 7, 2019, Pages 441-448]
R. Shetty, Vijeth Synthesis of 9-Aminoacridine and its Application as an Anode Material for Aqueous Rechargeable Lithium–ion Batteries [Volume 10, Issue 8, 2019, Pages 586-594]
R. Tantawy, Hesham Ag₂CO₃ / Magnetic reduced graphene oxide nanocomposite as advanced visible light photocatalytic hybrid materials for efficient degradation of azo dye [Volume 10, Issue 7, 2019, Pages 491-498]
Ruan, Wenqian Removal of dyes from wastewater by nanomaterials : A review [Volume 10, Issue 1, 2019, Pages 9-20]
Ruediger, Andreas Oxygen vacancy filament-based resistive switching in Hf_0.5Zr_0.5O₂ thin films for non-volatile memory [Volume 10, Issue 6, 2019, Pages 405-409]
Russo, Lisa (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]

S

Saifur Rahman, M. Graphene-MoS₂-Au-TiO₂-SiO₂ Hybrid SPR Biosensor for Formalin Detection: Numerical Analysis and Development [Volume 10, Issue 9, 2019, Pages 656-662]
Salmaliyan, M. Microstructure and Mechanical Characterization Study in the IN718/BNi-2/316L Joint by Transient Liquid Phase Bonding Process [Volume 10, Issue 9, 2019, Pages 663-670]
Salvagni, Emiliano Cell study of the biomimetic modifications on a CoCrMo alloy for biomedical applications [Volume 10, Issue 3, 2019, Pages 180-184]
Samaria, Bhumika Functionalized Nano Carbon for excellent Microwave Absorption at GHz Frequency [Volume 10, Issue 9, 2019, Pages 637-642]
S. Amer, Mabrook Modification of mesoporous titanium dioxide with cobalt oxide electrocatalyst for enhanced oxygen evolution reaction [Volume 10, Issue 2, 2019, Pages 136-144]
S. Anand, M. Plasma Activated Water Generation and its Application in Agriculture [Volume 10, Issue 10, 2019, Pages 700-704]
Sangermano, M. Functionalization of Graphene and Reduced Graphene Oxide in Different Matrices [Volume 10, Issue 7, 2019, Pages 460-464]
Santo, Loredana Shape Memory Polymer Composites for Long-Term Exposure to Space Environment [Volume 10, Issue 12, 2019, Pages 903-906]
Sardini, Emilio Hybrid EEG-EMG based brain computer interface (BCI) system for real-time robotic arm control [Volume 10, Issue 1, 2019, Pages 35-40]
Sarkar, Manas Development of anti-bio deteriorate sustainable geopolymer by SiO₂ NPs decorated ZnO NRs [Volume 10, Issue 2, 2019, Pages 128-131]
Sarkar, Manas Metal oxide (V₂O₅) incorporated fly ash based geopolymer for better sustainable engineering composites [Volume 10, Issue 5, 2019, Pages 346-350]
Satheesh Kumar, R. Synthesis and role of co-dopants (alkaline earth divalents and halides) on the photoluminescence of Eu²⁺ doped BaAl₂O₄ phosphor [Volume 10, Issue 5, 2019, Pages 341-345]
S. Bag, Dibyendu Synthesis of AgNPs embedded double network nanocomposite hydrogels having high swelling and anti-bacterial characteristics [Volume 10, Issue 6, 2019, Pages 431-439]
S. Bhusari, Ganesh Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
S. Bruzzi, M. Micromechanical Fatigue Modelling of the Size Effect in Micro-Scale 316L Stainless Steel Specimens [Volume 10, Issue 7, 2019, Pages 455-459]
S. Bukalov, Sergey Laser Raman micro-spectroscopy as an effective non-destructive method of detection and identification of various sp² carbon modifications in industry and in nature [Volume 10, Issue 8, 2019, Pages 550-562]
Scano, Alessandra (FeCo/Ppy@C): Pt-free FeCo-Polypyrrole Nanocomposites Supported on Porous Carbon for Electrochemical Application [Volume 10, Issue 4, 2019, Pages 253-258]
Scarangella, Adriana Innovative silicon compatible materials for light emitting devices [Volume 10, Issue 6, 2019, Pages 410-416]
Scherillo, Fabio Innovative Graphene-PDMS sensors for aerospace applications [Volume 10, Issue 8, 2019, Pages 533-538]
Schieber, Gundula Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
Schindler, Christina Oxygen vacancy filament-based resistive switching in Hf_0.5Zr_0.5O₂ thin films for non-volatile memory [Volume 10, Issue 6, 2019, Pages 405-409]
Selvan, Namagal Study of TiO₂ nanofibers prepared by electrospinning technique [Volume 10, Issue 4, 2019, Pages 294-297]
Senna, Magdy Enhancement the properties of high and low-density polyethylene membranes by radiation grafting process [Volume 10, Issue 8, 2019, Pages 574-585]
Sergey, Gubin Graphene in Russia: The Main Centers, Research Areas, Results [Volume 10, Issue 12, 2019, Pages 855-859]
Serpelloni, Mauro Hybrid EEG-EMG based brain computer interface (BCI) system for real-time robotic arm control [Volume 10, Issue 1, 2019, Pages 35-40]
S.G, Pallavi Effect of silver nanoparticles on the ammonia gas sensing behavior in diphenylamine based conjugated polymer [Volume 10, Issue 3, 2019, Pages 215-221]
Shaikh, Shazia Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance [Volume 10, Issue 11, 2019, Pages 825-831]
Shalish, Ilan Effect of parasitic polytypes on ballistic electron transport in chemical vapor deposition grown 6H-SiC epitaxial layers [Volume 10, Issue 7, 2019, Pages 465-469]
Shalwan, A. Study the possibility of using sisal fibres in building applications [Volume 10, Issue 3, 2019, Pages 222-229]
Shamanian, M. Microstructure and Mechanical Characterization Study in the IN718/BNi-2/316L Joint by Transient Liquid Phase Bonding Process [Volume 10, Issue 9, 2019, Pages 663-670]
Sharma, Lekha Graphene and doped graphene: A comparative DFT study [Volume 10, Issue 7, 2019, Pages 484-490]
Shaw, Leon Coating - A potent method to enhance electrochemical performance of Li(NixMnyCoz)O₂ cathodes for Li-ion batteries [Volume 10, Issue 6, 2019, Pages 369-380]
Shen, Jia-Jia Preparation, stabilization, and self-assembly of gold nanoparticles by Chitosan derivatives [Volume 10, Issue 2, 2019, Pages 80-84]
Shi, Lei Review of nanoscale layered transition metal chalcogenide superconductors [Volume 10, Issue 3, 2019, Pages 152-163]
Shi, Shicai Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Shukla, Anuj Functionalized Nano Carbon for excellent Microwave Absorption at GHz Frequency [Volume 10, Issue 9, 2019, Pages 637-642]
Siang Koh, Wee Nano-Graphene and Its Derivatives for Fabrication of Flexible Electronic Devices: A Quick Review [Volume 10, Issue 10, 2019, Pages 676-681]
Simančík, František Highly efficient storage of solar gains using aluminum foam heat exchangers [Volume 10, Issue 5, 2019, Pages 351-354]
Sinha, Sucharita Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance [Volume 10, Issue 11, 2019, Pages 825-831]
Soltanolkottabi, Fariba Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO₂ adsorption [Volume 10, Issue 8, 2019, Pages 604-609]
Somkuwar, Subhash Green fabrication of zinc oxide nanospheres by aspidopterys cordata for effective antioxidant and antibacterial activity [Volume 10, Issue 5, 2019, Pages 355-360]
Sonawane, Kamini Review on Detection of Phenol in Water [Volume 10, Issue 11, 2019, Pages 753-785]
Song, Peng Synthesis, Structural Characterization, Dielectric and Piezoelectric Properties of Multiferroic Double-perovskite Bi₂FeMnO₆ Ceramics [Volume 10, Issue 12, 2019, Pages 874-879]
Soni, Smita Functionalized Nano Carbon for excellent Microwave Absorption at GHz Frequency [Volume 10, Issue 9, 2019, Pages 637-642]
Soykeabkaew, Nattakan Micro/Nanostructured Papers from Bagasse Pulp Reinforced by Nanofibrillated Cellulose from different Agro-Waste Sources [Volume 10, Issue 11, 2019, Pages 814-818]
Sreenivasulu, B. Structural, Optical and Magnetic Properties of Pristine, (Mn, Al) co-doped ZnO Nanocrystallites Synthesized via co-Precipitation Method [Volume 10, Issue 11, 2019, Pages 819-824]
Sridhar, Nagarajan TiO₂ nanoparticles induced oxidative stress mediated DNA damage in the liver of adult male Wistar rats [Volume 10, Issue 2, 2019, Pages 145-150]
Stefaniak, Daniel Chances and challenges in the application of fiber metal laminates [Volume 10, Issue 2, 2019, Pages 91-97]
Subramanian, Mahesh Nanosecond Laser Surface Patterning of Ti6Al4V Bio-alloy for Improved Biological Performance [Volume 10, Issue 11, 2019, Pages 825-831]
Sudame, Atul SPIONs and curcumin co-encapsulated mixed micelles based nanoformulation for biomedical applications [Volume 10, Issue 3, 2019, Pages 185-188]
Sukhani, Seema Plasma Activated Water as a Source of Nitrogen for Algae Growth [Volume 10, Issue 11, 2019, Pages 797-801]
Sun, Weifu Molecular origin of hardening effect [Volume 10, Issue 2, 2019, Pages 112-115]
Suzauddin Yusuf, Sk. Investigating the Machinability of Metallic Matrix Composites Reinforced by Carbon Nanotubes: A Review [Volume 10, Issue 11, 2019, Pages 786-792]
Swapna, P. Structural, Optical and Magnetic Properties of Pristine, (Mn, Al) co-doped ZnO Nanocrystallites Synthesized via co-Precipitation Method [Volume 10, Issue 11, 2019, Pages 819-824]

T

Takkalkar, Pooja Morphological, structural, thermal and degradation properties of polylactic acid-waxy maize starch nanocrystals based nanocomposites prepared by melt processing [Volume 10, Issue 3, 2019, Pages 170-177]
Talaat, Ahmed Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]
Tangestaninejad, Shahram Investigating the possibility of using acetic acid in place of HF in chromium-benzenedicarboxylates (MIL-53 and MIL-101) synthesis applicable for CO₂ adsorption [Volume 10, Issue 8, 2019, Pages 604-609]
Tango, Martin Tuning Polydimethylsiloxane (PDMS) properties for biomedical applications [Volume 10, Issue 2, 2019, Pages 107-111]
Tanzim, Saiyed Silver nanoparticles mediated by extract of Guar plant (Cyamopsis tetragonoloba)), and evaluation of their photocatalytic and antibacterial properties [Volume 10, Issue 4, 2019, Pages 284-293]
Tarannum, Arshiya Review on Detection of Phenol in Water [Volume 10, Issue 11, 2019, Pages 753-785]
Tavares, Joana Evaluation of NSAIDs antioxidant activity on lipid peroxidation in splenocyte membranes [Volume 10, Issue 3, 2019, Pages 164-169]
Tawichai, Nattaya Micro/Nanostructured Papers from Bagasse Pulp Reinforced by Nanofibrillated Cellulose from different Agro-Waste Sources [Volume 10, Issue 11, 2019, Pages 814-818]
Teipel, Ulrich Influence factors on the comminution process of wood for the production of precursors and basic chemicals for the chemical industry [Volume 10, Issue 1, 2019, Pages 21-28]
Teteris, Janis Dual Effect of Light Irradiation for Surface Relief Gratings Formation in Se-rich Ge-Se Thin Films [Volume 10, Issue 12, 2019, Pages 868-873]
T. Gresser, Götz Adaptive FRP Structures for Exterior Applications [Volume 10, Issue 12, 2019, Pages 913-918]
Thalau, Janis Influence of railway-track grinding on the track material condition and tribological behaviour [Volume 10, Issue 7, 2019, Pages 449-454]
Thangapandiyan, Shanmugam TiO₂ nanoparticles induced oxidative stress mediated DNA damage in the liver of adult male Wistar rats [Volume 10, Issue 2, 2019, Pages 145-150]
Thi Bich Quyen, Tran Novel synthesis of Pd nanosheets used as highly sensitive SERS substrate for trace fluorescent dye detection [Volume 10, Issue 4, 2019, Pages 279-283]
Tiwari, Ashutosh Current Scenario of Healthcare [Volume 10, Issue 1, 2019, Pages 1-1]
Tiwari, Ashutosh Wearable Healthcare Devices [Volume 10, Issue 10, 2019, Pages 675-675]
Tiwari, Ashutosh Current Global Scenario of Electric Vehicles [Volume 10, Issue 11, 2019, Pages 752-752]
Tiwari, Ashutosh Researcher of the Year 2019: Professor Enge Wang – A Legendary Researcher of Atomistic World [Volume 10, Issue 12, 2019, Pages 850-854]
Tiwari, Ashutosh Impact of digital transformation for Mass healthcare [Volume 10, Issue 2, 2019, Pages 79-79]
Tiwari, Ashutosh Intelligent healthcare for future medicine [Volume 10, Issue 3, 2019, Pages 151-151]
Tiwari, Ashutosh Tech-footprints for virtual medicine [Volume 10, Issue 4, 2019, Pages 230-230]
Tiwari, Ashutosh Artificial intelligence and machine learning empowering the mass medicine [Volume 10, Issue 5, 2019, Pages 302-302]
Tiwari, Ashutosh 9th Anniversary of Advanced Materials Letters: Progress and Opportunities [Volume 10, Issue 6, 2019, Pages 366-368]
Tiwari, Ashutosh Smart Healthcare pulls up Clouds for Virtual Medicine [Volume 10, Issue 7, 2019, Pages 440-440]
Tiwari, Ashutosh Cloud Medicine set to Revolutionize Doorstep Personalized Healthcare [Volume 10, Issue 8, 2019, Pages 519-519]
Tiwari, Ashutosh Healthcare informatics driven nanotechnology [Volume 10, Issue 9, 2019, Pages 610-610]
Tobolka, Peter Highly efficient storage of solar gains using aluminum foam heat exchangers [Volume 10, Issue 5, 2019, Pages 351-354]
Toci, Guido Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Trettin, Reinhard A fundamental study on the mechanistic impact of repeated de- and rehydration of Ca(OH)₂ on thermochemical cycling in technical scale [Volume 10, Issue 5, 2019, Pages 312-318]
Trojanová, Zuzanka Anisotropy of Mechanical Properties of an AZ31 Alloy Prepared by SPD Method [Volume 10, Issue 12, 2019, Pages 887-892]
Trombetti, Tomaso Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Element [Volume 10, Issue 10, 2019, Pages 695-699]
Tsuboi, Nozomu Graphene micromesh for transparent conductive films application [Volume 10, Issue 6, 2019, Pages 417-420]
Tyagi, Jyoti Graphene and doped graphene: A comparative DFT study [Volume 10, Issue 7, 2019, Pages 484-490]

V

Van Hong Thien, Doan Novel synthesis of Pd nanosheets used as highly sensitive SERS substrate for trace fluorescent dye detection [Volume 10, Issue 4, 2019, Pages 279-283]
Vannini, Matteo Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Varga Pajtler, Maja Modulation of optical properties with multilayer thickness in antimonene and indiene [Volume 10, Issue 4, 2019, Pages 270-274]
Vasantharaja, Dasal TiO₂ nanoparticles induced oxidative stress mediated DNA damage in the liver of adult male Wistar rats [Volume 10, Issue 2, 2019, Pages 145-150]
Vasilopoulou, Maria Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
Venkatramana Reddy, S. Structural, Optical and Magnetic Properties of Pristine, (Mn, Al) co-doped ZnO Nanocrystallites Synthesized via co-Precipitation Method [Volume 10, Issue 11, 2019, Pages 819-824]
Verma, Chetna Water Management within Tragacanth gum-g-polyitaconic Acid Hydrogels [Volume 10, Issue 10, 2019, Pages 711-714]
Verma, Chetna Preparation of novel tragacanth gum-entrapped lecithin nanogels [Volume 10, Issue 4, 2019, Pages 267-269]
Victoria Tuttolomondo, María Riboflavin-UVA gelatin crosslinking: Design of a biocompatible and thermo-responsive biomaterial with enhanced mechanical properties for tissue engineering [Volume 10, Issue 5, 2019, Pages 324-328]
Vladimir, Grachev Graphene in Russia: The Main Centers, Research Areas, Results [Volume 10, Issue 12, 2019, Pages 855-859]
V. Lebedeva, Marina Development of Advanced Electrode Materials on Porous Silicon for Micropower Formic Acid-Oxygen Fuel Cells [Volume 10, Issue 10, 2019, Pages 705-710]
Vourdas, Nikos Room temperature growth of ultra porous hot-wire deposited tantalum pentoxide [Volume 10, Issue 6, 2019, Pages 395-399]
V. Ragutkin, Alexander Development of Advanced Electrode Materials on Porous Silicon for Micropower Formic Acid-Oxygen Fuel Cells [Volume 10, Issue 10, 2019, Pages 705-710]

W

Wang, Dian Low temperature processed efficient and stable perovskite solar cell [Volume 10, Issue 2, 2019, Pages 98-106]
Wang, Kaiyou Broadband and fast photodetectors based on multilayer p-MoTe₂/n-WS₂ heterojunction with graphene electrodes [Volume 10, Issue 5, 2019, Pages 329-333]
Wang, Shu Review of nanoscale layered transition metal chalcogenide superconductors [Volume 10, Issue 3, 2019, Pages 152-163]
Wang, Zheng Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Watanabe, Shinichi Impact of carbon black aggregates on the optical properties of black rubber samples in the terahertz frequency range [Volume 10, Issue 1, 2019, Pages 49-52]
Watanabe, Sho Graphene micromesh for transparent conductive films application [Volume 10, Issue 6, 2019, Pages 417-420]
Wei, Xia Broadband and fast photodetectors based on multilayer p-MoTe₂/n-WS₂ heterojunction with graphene electrodes [Volume 10, Issue 5, 2019, Pages 329-333]
Wei, Xionghui Removal of dyes from wastewater by nanomaterials : A review [Volume 10, Issue 1, 2019, Pages 9-20]
W. Krause, Thomas Selecting the correct electromagnetic inspection technology [Volume 10, Issue 7, 2019, Pages 441-448]
Wu, Heng Synthesis, Structural Characterization, Dielectric and Piezoelectric Properties of Multiferroic Double-perovskite Bi₂FeMnO₆ Ceramics [Volume 10, Issue 12, 2019, Pages 874-879]
Wu, Shuo-En Increasing the efficiency of graphene-based Schottky-barrier devices [Volume 10, Issue 2, 2019, Pages 132-135]

Y

Yamazaki, Sohei Graphene micromesh for transparent conductive films application [Volume 10, Issue 6, 2019, Pages 417-420]
Yan, Dong Review of nanoscale layered transition metal chalcogenide superconductors [Volume 10, Issue 3, 2019, Pages 152-163]
Yan, Faguang Broadband and fast photodetectors based on multilayer p-MoTe₂/n-WS₂ heterojunction with graphene electrodes [Volume 10, Issue 5, 2019, Pages 329-333]
Yan, Lei Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Yang, Hao Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Yang, Huai Broadband and fast photodetectors based on multilayer p-MoTe₂/n-WS₂ heterojunction with graphene electrodes [Volume 10, Issue 5, 2019, Pages 329-333]
Yang, Yang Fabrication of Y₂O₃ coatings by cold-spray [Volume 10, Issue 3, 2019, Pages 189-192]
Yang, Zhaoxiang Spectroscopic characterization and laser test of a 10at.% Yb:Y₃Sc_1.5Al_3.5O₁₂ ceramic sample [Volume 10, Issue 1, 2019, Pages 45-48]
Yirga, Geitu Synthesis and Characterization of Humic Acid-coated Fe₃O₄ Nanoparticles for Methylene Blue Adsorption Activity [Volume 10, Issue 10, 2019, Pages 715-723]
Yi Toh, Pey Nano-Graphene and Its Derivatives for Fabrication of Flexible Electronic Devices: A Quick Review [Volume 10, Issue 10, 2019, Pages 676-681]
Yousif, B.F. Study the possibility of using sisal fibres in building applications [Volume 10, Issue 3, 2019, Pages 222-229]
Yu, Ming Anisotropic and Nonlinear Mechanical Properties in Two-dimensional Nanomaterials [Volume 10, Issue 12, 2019, Pages 880-886]

Z

Zeng, Anna Anisotropic and Nonlinear Mechanical Properties in Two-dimensional Nanomaterials [Volume 10, Issue 12, 2019, Pages 880-886]
Zeng, Kevin Anisotropic and Nonlinear Mechanical Properties in Two-dimensional Nanomaterials [Volume 10, Issue 12, 2019, Pages 880-886]
Zhang, Congyan Anisotropic and Nonlinear Mechanical Properties in Two-dimensional Nanomaterials [Volume 10, Issue 12, 2019, Pages 880-886]
Zhang, Hui Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Zhang, Lili Formation of nano-dispersed Cu particles during aging of a Fe-Cu alloy and dislocation effect [Volume 10, Issue 4, 2019, Pages 263-266]
Zhang, Wen Fabrication and characterization of nano-bridge Josephson junction based on Fe_0.94Te_0.45Se_0.55 thin film [Volume 10, Issue 5, 2019, Pages 319-323]
Zhang, Xin Matrix and Variant Transformations Simulate Statistical Canonical Ensembles from Fock to Poissonian States of Random Sequences [Volume 10, Issue 9, 2019, Pages 622-626]
Zhang, Yali Biomimetic surfaces with hierarchical structure using microsized texture and nanosized Cu particles for superhydrophobicity [Volume 10, Issue 8, 2019, Pages 569-573]
Zhao, Jiuzhou Formation of nano-dispersed Cu particles during aging of a Fe-Cu alloy and dislocation effect [Volume 10, Issue 4, 2019, Pages 263-266]
Zheng, Chao Brief Review: Simulation of Novel Systems Using Duality Quantum Algorithm [Volume 10, Issue 9, 2019, Pages 611-613]
Zheng, Chris Matrix and Variant Transformations Simulate Statistical Canonical Ensembles from Fock to Poissonian States of Random Sequences [Volume 10, Issue 9, 2019, Pages 622-626]
Zheng, Jeffrey Matrix and Variant Transformations Simulate Statistical Canonical Ensembles from Fock to Poissonian States of Random Sequences [Volume 10, Issue 9, 2019, Pages 622-626]
Zhou, Chao Removal of dyes from wastewater by nanomaterials : A review [Volume 10, Issue 1, 2019, Pages 9-20]
Zhu, Wenkai Broadband and fast photodetectors based on multilayer p-MoTe₂/n-WS₂ heterojunction with graphene electrodes [Volume 10, Issue 5, 2019, Pages 329-333]
Zhu, Xinhua Synthesis, Structural Characterization, Dielectric and Piezoelectric Properties of Multiferroic Double-perovskite Bi₂FeMnO₆ Ceramics [Volume 10, Issue 12, 2019, Pages 874-879]
Zhukov, Arcady Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]
Zhukova, Valentina Magnetic microwires for sensor applications [Volume 10, Issue 5, 2019, Pages 305-311]
Zuth, Daniel Ring models of atoms, molecules and nanomaterials [Volume 10, Issue 4, 2019, Pages 248-252]

Advanced Materials Letters

Home

Guide for Authors

Submit Manuscript

Reviewers

Author Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

Advanced Materials Letters

Home

Browse

Journal Info

Guide for Authors

Submit Manuscript

Reviewers

Author Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z