Aparicio-Razo, Manuel Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Araźna, Aneta Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
B
Balliou, Angelika Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Bartha, Johann WolfgangImproved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Benavides, Miranda Synthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
C
Chandiri, Sudhakar Reddy Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Chandra Mouli, V. Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Chavarin, Carlos Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Che, Chang Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Chen, Daniel Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Cuzziramos, Fernando AlonsoSynthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Cuzziramos, Fernando AlonsoSynthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Czaiński, Michał Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Davazoglou, Dimitris Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Dossumov, Kusman The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Dubecky, Daniel Experimental Analysis of Composite Beams [Volume 13, Issue 3, 2022]
Dzigrashvili, Teimuraz The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
E
Ezhilarasi, K.S. Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
F
Fajstavr, Dominik Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Fountoulakis, Antonios CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
Fthenakis, Zacharias CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
G
Gaddameedi, Hima Bindu Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Gallegos, Daily MariaSynthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Gventsadze, David The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
H
Huaman, Fredy AlbertoSynthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Huaman-Mamani, Fredy AlbertoSynthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Hudepohl, Ronald Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Hurtukova, Klaudia Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Jalabadze, Nikoloz The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Janeczek, Kamil Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Kadari, Ramaswamy Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Kammara, Vaishnavi Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
Karumbaiah, Prathiksha Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
Kim, Sung YongReactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Knaut, Martin Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Kościelski, Marek Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Kosyl, Mateusz Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Kouvatsos, Dimitris Gas Sensing Investigation of Porous Hot-wire Molybdenum Disulphide Thin Films [Volume 13, Issue 1, 2022, Pages 2201-1689]
Krishna Priya, M. Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
Kuruva, Praveena Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Kutelia, Elguja The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Kutová, Anna Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Kutová, Anna Preparation of Bacterial Nanocellulose-Hydroxyapatite Composite [Volume 13, Issue 4, 2022]
Lathiotakis, Nektarios CO2 Permeation through Nanoporous graphene: a theoretical study [Volume 13, Issue 3, 2022]
Lengyel, Andras Effect of closely spaced knots on the failure mechanism of timber beams [Volume 13, Issue 3, 2022]
Leszczynski, Sebastian Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Lipiec, Krzysztof Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
M
Ma, Shaohai Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Mambetova, Manshuk The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Mastoi, Ghulam MurtazaFlake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Mayta, Denis LeonardoSynthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Mayta, Denis Synthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Méndez, J. Flores Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Mikolajick, Thomas Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Mongalo-Vázquez, José Luis Jr. Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Muga, Vithal Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
N
Nadaraia, Lili The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Navarro-Zárate, Adolfo Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Naz, Gul Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Qian, Gong Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
R
Reif, Johanna Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Reuben Jonathan, D. Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
Richter, Karola Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Rodriguez, Gerhard PaulSynthesis and thermomechanical behavior of SiC/Si compounds derived from wood waste [Volume 13, Issue 3, 2022]
Rodriguez, Gerhard PaúlSynthesis and Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers [Volume 13, Issue 4, 2022]
Roy, Pratik Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
S
Saad, Khaled Effect of closely spaced knots on the failure mechanism of timber beams [Volume 13, Issue 3, 2022]
Sailaja, R.R.N. Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
Santos-Enríquez, Víctor HugoComparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Schulz, Mark Reactor Design for Manufacturing Carbon Hybrid Materials [Volume 13, Issue 1, 2022, Pages 2201-1685]
Simran, Fiza Removal of crystal violet dye using grafted guar gum along with nanoclay and MWCNT [Volume 13, Issue 1, 2022, Pages 2201-1686]
Singh, Vineet KumarFabrication of n+-poly-Si/p+-c-Si tunnel diode using Low-pressure Chemical Vapor Deposition for Photovoltaic Applications [Volume 13, Issue 2, 2022, Pages 2202-1693]
Slepička, Petr Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Slepičková Kasálková, Nikola Preparation of (C/Ag) Nanocomposites Induced by High Excimer Laser [Volume 13, Issue 4, 2022]
Solangi, Nizam Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Solangi, Sorath Flake like Copper Oxide Nanostructures and their Application in Electrocatalytic Sensing of Growth-Promoting Agents [Volume 13, Issue 4, 2022]
Sreenivasulu, V. Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Stankiewicz, Beata The resistance to UV radiation for GFRP pultruded bridge panels [Volume 13, Issue 3, 2022]
Stęplewski, Wojciech Investigation of Thermal behaviour of Swelling Anti-Fire Composite Materials Identified with RFID Technology [Volume 13, Issue 2, 2022, Pages 2202-1692]
Strobel, Carsten Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Sunku, Manasa Preparation, Characterization and Photocatalytic Activity studies of Ag+, Cu2+ and Sn2+-doped Li2GeTeO6 under Visible Light Irradiation [Volume 13, Issue 3, 2022]
T
Teng, Haipeng A probability based methodology for multi object optimization in material selection [Volume 13, Issue 1, 2022, Pages 2201-1687]
Tiwari, Ashutosh Priority of Materials Research for Reaching Climate Neutrality Goals [Volume 13, Issue 1, 2022, Pages 2201-1683]
Tiwari, Ashutosh Hydrogen Leading the Green Energy Future [Volume 13, Issue 2, 2022, Pages 2202-1690]
Tiwari, Ashutosh Climate Diplomacy to Attain Global Eco-Neutrality [Volume 13, Issue 3, 2022, Pages 2203-1697]
Tiwari, Ashutosh Materials Advances to Achieve One World Climate [Volume 13, Issue 4, 2022]
Tsurtsumia, Olga The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
U
Upender, G. Structural and Optical Studies of Quaternary Glass System [Volume 13, Issue 2, 2022, Pages 2202-1695]
Usha, G. Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
V
Vasanthi, R. Synthesis, Structural and Spectroscopic analysis, Thermodynamic and Micro hardness testing of a Chalcone molecule [Volume 13, Issue 2, 2022]
Vivanco-Pérez, Israel Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Voelkel, Sandra Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
W
Wang, Yi A probability based methodology for multi object optimization in material selection [Volume 13, Issue 1, 2022, Pages 2201-1687]
Weissova, Michala Experimental Analysis of Composite Beams [Volume 13, Issue 3, 2022]
Wenger, Christian Improved graphene-base heterojunction transistor with different collector semiconductors for high-frequency applications [Volume 13, Issue 1, 2022, Pages 2201-1688]
Y
Yáñez Ramos, J. A. Comparison of Material Properties for Dental Implants: Titanium, Polyetheretherketone, Zirconium and Silicon Nitride [Volume 13, Issue 1, 2022, Pages 2201-1684]
Yan, Kai Microstructural Evolution for Super304H Austenite Steel used in China Plants [Volume 13, Issue 2, 2022, Pages 2202-1694]
Yergasiyeva, Gaukhar The Effect of Granulated Fe Cluster-doped CNTs Support on The Catalytic Performance of NiO Catalyst in the DRM Reaction [Volume 13, Issue 4, 2022]
Z
Zheng, Maosheng A probability based methodology for multi object optimization in material selection [Volume 13, Issue 1, 2022, Pages 2201-1687]
